Feeds & Speeds G-Wizard 5.51 engine · gwiz
RPM–
Feed IPM–
Power–
Deflection–
…
Account

Machine

Material

BHN

Tool

in
Tool dimensions
in
in
in
in
°
°

Blank = engine default: stickout = depth + diameter, shank = diameter, lead 90°, helix 40°. Lead angle is also the V-bit / dovetail angle.

Cut

in
in
% D
100%
Tool life MRR
Overrides & manufacturer's data
SFM
RPM
in/t
IPM
SFM
in/t

Leave blank to let the engine calculate. Overrides are held fixed, as in G-Wizard.

Machine limits & spindle power
RPM
RPM
IPM
HP

Blank = the machine profile's value (shown greyed). G-Wizard 5.51 always used Normal rigidity.

Tool crib

in
in
Export CSV Export JSON
T#NameTypeDia.Fl.Material / coatingHolderNotes

Thread

Tap drill & measurement

%
in
in

Port of the G-Wizard 5.51 thread calculator, including its quirks (see README) except the ISO allowance fix (see DEVIATIONS.txt). Check critical values against the standard.

Thread drawing

Geometry calculators

Taylor tool life estimate

%
10..200 (G-Wizard machine SFM adjust)
SFM adjust100%
10%200%

G-Wizard's estimate: tool life ratio = (100 / SFM adjust)1/n with Taylor exponents n = 0.16 HSS, 0.35 carbide, 0.5 coated carbide, 0.6 ceramic; shown up to 1000x.

Deflection limit vs tool life

% of max chipload
1..79

Vendor catalogs & sample cribs

in
in
NameTypeDia.Fl.Cut len.Material / coatingProduct

GARR TOOL and Fullerton catalogs, the ACME demo catalog (GARR data relabeled in G-Wizard's demo build) and the sample cribs from G-Wizard's Tool Crib download list. Catalog data as shipped with G-Wizard 5.51; check current vendor data before relying on it.

Notebook

    Import G-Wizard Notebook.xml

    Notebook.xml is in G-Wizard's preferences folder. Pages whose names already exist are skipped.

     

    Geometric Dimensioning and Tolerancing Reference (QuickRef)

    Control TypeCharacteristicSymbolNotes

    The characteristic names and symbols link to CNCCookbook's article about each one (the links G-Wizard 5.51 used). Symbols are drawn per ASME Y14.5; the Unicode character is shown for copying.

    True Position (Geometry calculator)

    in
    in
    in

    Deviations of the measured feature from its nominal (basic) position. True position (diametral) = 2√(X² + Y² + Z²), to compare with the Position tolerance in the feature control frame. Same calculator as Geometry > True Position.

    Drill Chart (QuickRef)

    in
    selects the largest drill ≤ it
    InchMetric (mm)DesignationUse

    G-Wizard 5.51's drill chart: 336 number (#1-#107), letter (A-Z), fractional (1/64"-1 1/2") and metric (0.05-38 mm) drills. "Use" is G-Wizard's tap drill and wood screw pilot / shank hole cross-reference. Metric sizes are the drills' own sizes; where G-Wizard 5.51 showed a value rounded from the 4-decimal inch size it is shown small and grey (DEVIATIONS.txt 41). The "Sizes" button next to the tool diameter on the Feeds & speeds tab opens this chart as G-Wizard's Drill Index picker.